Operation Manual

1
FEATURES OF YOUR HYUNDAI
28
To install the child restraint seat
tether
1. Open the tether anchor cover on the
rear luggage compartment floor.
B230C05JM
Tether
anchor cover
Child Restraint
Hook Holder
2. Route the child restraint seat tether strap
over the seatback.
Rear luggage compartment floor
B230B01JM
Front of Vehicle
Child
Restraint
Hook
Holders
Tether Strap
Hook
!
For vehicles with adjustable headrests,
route the tether strap under the head-
rest and between the headrest posts,
otherwise route the tether strap over the
top of the seatback.
3. Connect the tether strap hook to the
child restraint hook holder and tighten
to secure the seat.
WARNING:
o Install the Child Restraint Seat fully
rearward against the seatback, with
the seatback reclined two positions
from the most upright latched posi-
tion.
o A child can be seriously injured or
killed in a collision if the child restraint
is not properly anchored. Always
follow the child seat manufacturer’s
instructions for installation and use.