Operation Manual

3-90
Auto light position (if equipped)
When the light switch is in the AUTO
light position, the taillights and head-
lights will be turned ON or OFF auto-
matically depending on the amount
of light outside the vehicle.
High - beam operation
1. Turn the light switch to the head-
light position.
2. Push the lever away from you.
✽
NOTICE
• The high-beam indicator will light
when the headlight high beams are
switched on.
• To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time while the
engine is not running.
Convenient features of your vehicle
OLMB043260 OLMB043262
• Never place anything over the
sensor (1) located on the
instrument panel, this will
ensure better auto-light system
control.
• Don’t clean the sensor using a
window cleaner, the cleaner
may leave a light film which
could interfere with sensor
operation.
• If your vehicle has window tint
or other types of coating on
the front windshield, the Auto
light system may not work
properly.
CAUTION