Operation Manual

2-30
Safety system of your vehicle
Rear center seat belt
3-point rear center seat belt
(if equipped)
To fasten the rear center seat belt:
1. Extract the metal tab from the hole
of the belt assembly cover and
slowly pull the metal tab out from
the retractor.
2. Insert the metal tab (A) into the
buckle (C). There will be an audi-
ble “click” when the tab locks into
the buckle. Make sure the belt is
not twisted.
3. Pull the metal tab (B) and insert
the metal tab (B) into the buckle
(D). There will be an audible “click”
when the tab locks into the buckle.
Make sure the belt is not twisted.
OLMB033027
OLMB033028 OLMB033029