Operation Manual

2-31
Safety system of your vehicle
2
The seat belt automatically adjusts to
the proper length after the lap belt
portion is adjusted manually so that it
fits snugly around your hips. If you
lean forward in a slow, easy motion,
the belt will extend and move with
you. If there is a sudden stop or
impact, the belt will lock into position.
It will also lock if you try to lean for-
ward too quickly.
To release the rear center seat
belt:
1. Press the release button on the
buckle (D) and remove the metal
tab (B) from the buckle (D).
2. Insert a key or similar rigid device
into the web release hole (C). Pull
out metal tab (A) from the buckle
and allow the webbing to retract
automatically.
When using the rear seat center
belt, you must lock all metal tabs
and buckles. If any metal tab or
buckle is not locked, it will
increase the chance of injury in
the event of collision.
WARNING
Be sure the cargo is securely
loaded in the rear cargo area.
Not doing so may damage the
rear center seat belt in a sudden
stop or collision.
CAUTION
OLMB033031
OLMB033030