Operation Manual

8-7
8
Specifications & Consumer information
*
1
Refer to the recommended SAE viscosity numbers on the next page.
*
2
Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*
3
Yellow engine oil dipstick (if equipped)
*
4
Red engine oil dipstick (if equipped)
*
5
If the API service SM or ACEA A5 engine oil is not available in your country, you are able to use API service SL or ACEA A3.
*
6
Diesel Particulate Filter
Lubricant Volume Classification
Coolant
Gasoline
Engine
2.4L
7.1 ~ 7.4 l
(7.50 ~ 7.51 US qt.)
Mixture of antifreeze and distilled water
(Ethylene glycol base coolant for
aluminum radiator)
2.0L
6.7 l (7.08 US qt.)
Diesel
Engine
R2.0L
9.1 ~ 9.3 l
(9.61 ~ 9.82 US qt.)
Brake/clutch fluid
0.7~0.8 l
(0.74~0.85 US qt.)
FMVSS116 DOT-3 or DOT-4
Rear differential oil (4WD)
0.53 l (0.56 US qt.)
HYPOID GEAR OIL API GL-5, SAE 75W/90
(SHELL SPIRAX X or equivalent)
Transfer case oil (4WD)
0.6 l (0.63US qt.)
HYPOID GEAR OIL API GL-5, SAE 75W/90
(SHELL SPIRAX X or equivalent)
Fuel
58 l (15.32 US gal.)
Refer to “Fuel requirements” in foreword section