User Manual

IASUS_EAR3H_OPERATINGINSTRUCTIONS_v1_2020
11
MOUNTING THE EAR3H ONTO A HELMET
The EAR3H utilizes the included IASUS proprietary quick release system. To install, follow these steps:
Clean the mounting surface of your helmet.
Secure the EAR3H onto the Quick Release Mount (G).
Peel the second backing paper on the 3M Adhesive.
Position on your helmet and press rmly.
To remove EAR3H from the mount, simply push the
clip away from the amp and slide the unit until it is
fully released.
Peel away the backing paper on the 3M Adhesive (H)
and position in on the Quick Release Mount (G)
1
3 4
2
1 PEEL
2 STICK
1 PUSH CLIP AWAY
2 SLIDE