User's Manual

ER-600 User Manual

Figure 2-8: Transfer Terminal remotely

Remote AT commands are listed below:

1) AT

2) AT+MSERVER=addr, port

Change data center address and port, with reply OK or ERROR.

addr: data center address, either IP address or domain

port: data center port

3) AT+USER=user

Change DTU username, with reply OK or ERROR.

user：username

4) AT+CSQ

Query signal strength and network mode, with the following

reply:

OK:sig_quality,net_mode

sig_quality: 0-31, bigger value means better signal quality

net_mode:

FDD LTE

5) AT+REBOOT

Reboot the router, with reply OK.