User's Manual

ER-600 User Manual
35
Figure Appendix 2-2: Use 4G to access Internet by default
Set “Network Select” as WAN, and then click “Save”;
Choose “Network Settings” -> “WAN” to configure WAN parameters;
There are three kinds of types: DHCP, PPPoE and STATIC. Choose PPPoE if cable
MODEM is used to access internet, and choose DHCP or STATIC if a dedicated line
or LAN is used to access internet. Use STATIC if the IP address is static or assigned
manually, otherwise use DHCP.
Figure Appendix 2-3: Set type
When choosing PPPoE, PPPoE username and password should be set
additionally: