User's Manual

ER-600 User Manual
5
at the same time.
ER-600 can use WAN or WIFI network: in case cable network is
available, WAN (LAN1) port can be used to access cable network; and
in case WIFI is available, ER-600 can be configured to access internet
via WIFI. 4G, WAN and WIFI are all supported by ER-600, this greatly
facilitates customer’s project deployment that customers do not have
to choose different devices from different suppliers because of
different network access at the spot. This can not only save
procurement cost, but also reduce maintenance effort for the projects.
GPS model can be embedded into ER-600, to implement device
location. Set time interval of transmitting GPS location data, then after
ER-600 connects to data center, it will transmit location data to data
center with the predefined time interval. Data center can also ask for
GPS location data at any time by sending commands. Besides, the
device connecting ER-600 can also send AT command via
RS232/RS485 serial port to ask for location information.
ER-600 is easy to use, and is plug-n-play without any configuration.
Together with eTung’s eYun platform and Virhub/Vircom software, it
can be easy to integrate with PLC programming software, and there is
no extra integration effort. ER-600 is stable and easy-to-use, thus
greatly facilitates project deployment.
1.2 Product Outlook