User's Manual

ER-600 User Manual

3. Install Virhub software

Ask Virhub v5.x installation package from eTung (either from CD or eTung’s

website), install it on the host pc according to Virhub’s installation guide.

4. Login in Virhub and start data transfer

Run Virhub and click "Settings", input the username and password applied

before.

Figure Appendix 3-4: Login Virhub

1) Configure Microsoft Loopback adapter’s IP address: in the “Settings”

dialog, we can set Loopback adapter’s IP address in “Loopback Adapter

IP Settings”. IP1 is used to build a virtual LAN with the front-end device

(i.e. the Webcam), and it has to be in the same IP range as the

front-end device’s IP, for example, 192.168.3.*.