User's Manual

ER-600 User Manual
48
Figure Appendix 4-2: Input registration information
2. Configure ER-600
 Connect ER-600 with PC via Ethernet cross cable,
 the IP address in PC is set to obtain automatically;
 Open browser and input URL: 192.168.1.1;
 Input username: root, and password: 1234 to login;
 Choose DTU function in the menu list;
 Input main DC IP: eyun.etungtech.com
 Input main DC port: 8080
 Input account registered above;
 Select UART type: 232 or 485;
 Set serial port parameters: baud rate, data bits, stop bits, and parity;
 Click “Save”;
 Choose “Reboot System” in the menu list, and reboot ER-600.
NOTE: RS232 and RS485 serial ports cannot be used at the same time, choose
one of them to use in DTU function->Basic Cfg.