User's Manual

ER-600 User Manual

Figure Appendix 4-4: DTU connected to DC

3. Login Vircom and test communication

Find Vircom installation package from eTung website: www.etungtech.com,

and Download Center->DTU related, then download and install Vircom.

 Run Vircom software, and click “Configure”, then input the username

and password applied before;

 If user account is not configured in ER-600’s DTU function, please add

the device in Vircom by clicking “Add DTU”, then input ER-600’s IMEI

number to add the device;

 Choose the device, and then click “Add Mapping” to map a virtual COM

for ER-600;

 Run PLC program software to open the virtual COM and send/receive

data.