User's Manual

ER-600 User Manual
57
Appendix 6: Configure GPS Query
Settings and GPS data format
ER-600-N4G embeds GPS model and supports device location. GPS location
information can be actively transferred by ER-600 to the host PC, or: the host
PC sends AT+GPS? command to query GPS location information, or: the device
connecting ER-600 sends AT+GPS? command via serial port to query GPS
location information.
As shown in the figure below, in ER-600’s configuration webpage, choose “DTU
function” -> “Simple Cfg”, set GPS report interval in seconds. Setting it to 0
means ER-600 will not actively transfer location information to the host PC.
Figure Appendix 6-1: Set GPS report interval