User's Manual

ER-600 User Manual
1.5 Working Mechanism
Figure 1-9: ER-600 working mechanism
ER-600 connects with PC via Ethernet cross cable, and set PC’s IP
address as automatically obtained IP. After power on, it dials up into
4G network (or, via cable/WIFI network) and access Internet, then
PC can access Internet via ER-600, and then access the application
server.
At the same time, ER-600 can be a WIFI AP, and PC (or other
devices that support WIFI) can connect to ER-600’s AP with its own
WIFI network adapter, instead of using network cable, and then
access Internet via ER-600.
Meanwhile, ER-600 can be used to build remote virtual LAN with
Virhub or VPN, to monitor video remotely, and publish programs
remotely on LED color screens, acquire data and control PLC
remotely, etc.
1.6 Specifications
1.6.1 Technical Parameters
 Basic Parameters
 Power Supply: +12 ~ +48V wide range of voltage input
 Power Connector: inner(+) outer(-)
 Max Current: 350mA@+12V DC
 Standby Current: 250mA@+12V DC
 Network:
10