User's Manual

7
4 3
6
7
8
9
10
2 1
5
Transmitter Back
1. HDMI 1 IN
• HDMI1 input port.
2. HDMI Pass-Thru
• Outputs a duplicate of the source that is plugged into
HDMI 1.
3. HDMI 2 IN
• HDMI2 input port.
4. HDMI 3 IN
• HDMI3 input port.
5. USB
• USB port is used for service only.
6. IR-OUT
• Connects IR Flasher to the Transmitter for remote
control of external devices which are connected to
the Transmitter (i.e. Blu-Ray player, DVD, STB, etc).
7. PC AUDIO-IN *
• Stereo audio input port for PC, component, or
composite source.
8. PC-IN (VGA)**
• Supports component and composite input with
included Component/Composite Adaptor.
9. LAN
• LAN port used for wired connection alternative.
10. DC
• 12V DC power input.
* For the audio part of a component media source, use the PC
Audio input port with a 3.5mm to RCA cable (not included).
** If using the PC Video input port for component (YPbPr) or
composite media source, use the included
Component/Composite to VGA adaptor. For composite, use
the green jack on the adaptor for the yellow video plug.