Operation Manual

EN-15
Connect to TV
A. This unit is very user friendly, please just
connect it directly to TV’s headphone
jack as below :
1 Connect the LINE IN cable to:
- LINE IN socket on the unit.
- HEADPHONE socket on TV.
2 Unit turn on automatically. Press the
/SOURCE button to select
source.
3 Start to play on the TV.
Tip:
No need to use our Remote Control
set, you can simply use your TV’s
inherent Remote Control set to control
Vol+/Vol-.
B. In case your TV set does not has the
“Headphone” jack, you still can use the
following connection to achieve it.
1 Connect the LINE IN cable to:
- LINE IN socket on the unit.
- LINE OUT socket on TV.
Tip:
You can also use the Smart Remote
Control to adjust Vol+/Vol-.
Connect to an External Audio Device
Connect the LINE IN cable to:
- LINE IN socket on the unit.
- HEADPHONE socket on an
external audio device.
Tip:
You can also use the Smart Remote
Control to adjust Vol+/Vol-.
Connect Power
Caution:
- Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
Connect the AC power cord to:
- the AC ~ socket on this unit.
- the wall socket.
Connections