595 IRIS595 Installation Manual
1.01 Conventions: At various points within this guide, the following icons will be used to illustrate important or potentially dangerous information: ! ! ! ! ! ! ! ! WARNING This symbol indicates a risk of damaging the camera or other items or an important issue that may effect the operation of the camera. ! ! ! ! ! ! ! ! INFORMATION This symbol points out important information pertaining to the installation, operation and maintenance of the camera.
.01 Introduction Thanks for buying the IRIS595 NightRunner controller from Iris Innovations! By choosing NightRunner you have added a highly sensitive imaging device to your boat that aids visibility during the day and perhaps more importantly, at night or in low light conditions, thus enhancing your on board safety and enjoyment. The IRIS595 controller has been especially designed to controll the pan, tilt and zoom functions and operate NightRunners extended features.
.01 Typical Configuration Examples. For single camera, single controller installs no additional hardware is required. Simply connect the IRIS595 controller directly to the data lines of the breakout balun, and run the video from the breakout balun directly into your screen (or chartplotter etc).
6.01 Hardware Installation The IRIS595 controller is designed to be panel mounted into a dashboard or helm. The cutting template is enclosed. Fixing Points: The 595 Controller is shipped with 3mm x 40mm threaded studding and fixed using Nylock nuts supplied. Please use the red-marked areas on the template above as a guide to aid installation on to the helm or console, using suitable cutting tools and a 3.5mm drill bit for the mounting holes.
.01 Hardware Installation (Continued...
.01 Connecting Up 9.01 Controlling the Camera - IRIS595 The fitted power and data cable is provided with bare ends to aid in installation, so please ensure that care is taken in identifying the relevant connections and polarity. This section explains how the camera features are controlled and selected using the dedicated IRIS595 NightRunner Joystick Controller.
9.01 Controlling the Camera (Continued...) Scans MENU The camera supports 4 different Scan Modes. Once activated, tilt and zoom commands are still accepted by the camera but you will not be able to pan the camera until the Scan has been Stopped: Extended features are accessed by pressing the MENU button. Please note, in certain menuʼs, camera control functions are disabled. To exit back to the home screen at any time move the joystick up.
User Presets The camera has a built in memory that can be used to store up to 100 user ʻpresetʼ positions. A preset allows you to move the camera to a favourite or important position and learn that position so that the camera can be instructed to move at top speed to that position at the touch of a button. For example, you may want to point the camera so that itʼs facing directly aft so you can take a look at whatʼs coming up behind you.
Iris Innovations Limited (UK) Units 8 & 9 Swanwick Business Centre Bridge Road, Swanwick. Hampshire SO31 7GB United Kingdom Tel: +44(0)1489 570797 email: info@boat-cameras.com web: www.boat-cameras.com Iris Innovations Limited (USA) 1535 SE17th Street, Suite B115 Fort Lauderdale, Florida 33316 United States of America Tel: +1 (954) 533 9381 email: info@boat-cameras.com web: www.boat-cameras.com ©2013 Iris Innovations Limited. All information correct at time of going to press.