User`s guide

This unit has been produced according to all current safety regulations.

The following safety tips should safeguard users against careless use

and the dangers connected with such use.

• Although this appliance has been carefully manufactured and rigorous-

ly checked prior to leaving the factory, as with all electrical appliances

it is possible for problems to develop. If you notice smoke, an exces-

sive buildup of heat or any other unexpected phenomena, you should

disconnect the plug from the main power socket immediately.

• Ensure that the unit is sufciently ventilated! Never place next to or

underneath curtains!

• The main plug or appliance coupler is used as the disconnect device,

the disconnect device shall remain readily operable.

• This set should only be connected to a main power supply which

matches that stated on the label on the rear of it-do not attempt to con-

nect it to any other type of supply.

• The socket-outlet must be installed near the equipment and should be

readily accessible.

• To prevent overload, don’t share the same main supply socket with too

many other items of equipment.

• Apparatus with Class 1 construction shall be connected to a main

socket outlet with a protective grounding connection.

• Keep away from rodents. Rodents enjoy biting into electric exes.

• Always hold the plug when pulling out the plug from the main supply

socket. Do not pull on the ex. The ex can become overloaded and

cause a short circuit.

• Set up the unit so that no one is able to trip over the ex.

• Do not place heavy items on the ex, which may damage it.

• Take note that the ex cannot be reached and pulled by young chil-

dren, avoiding injury.

• Do not set up the unit near heat sources. The casing and the ex could

be damaged by the impact of heat.

• Avoid placing the unit on any surfaces that may be subject to vibra-

tions or shocks.