Datasheet

SYSTEM REQUIREMENTS
 Hardware requirements: notebook / PC with free USB 3.0 / 2.0 port. If you connect to USB 2.0
transfer speed and some function can be limited. CPU Processor Intel Pentium 1.2GHz and
higher, 512MB RAM.
 Operation System: Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 32/64 bit, Mac OS X, Linux,
Android
Note:
Prior to installing the USB 3.0 port, make sure that there are (for the USB 3.0 controller in the
laptop/PC) installed the latest drivers for it. In case of outdated USB 3.0 drivers problems during
installation or use may occur.
Installing the USB HUB (USB 3.0 ports type A) is automatic from the system. This HUB will be
automatically detected and installed immediately after connecting to the USB port on your laptop/PC
or PCIe expansion card with internal USB 3.0 host controller.
Before first connecting install the LAN port from the supplied CD and then connect to the device.
Current drivers are also available on our website www.i-tec-europe.eu in the "Download" section for
this product.
PRODUCT OVERVIEW
1. USB connector Type-A
2. 3x USB 3.0 port Type-A
3. RJ-45 port