Datasheet

 Windows® 7 / Windows® 8 / Windows® 8.1: Control Panel / System and Security / System /
Device Manager
 Windows® XP / Windows® Vista: Control Panel / System / Hardware / Device Manager
 In the Network adapters group, an item named „ASIX AX88179 USB 3.0 to Gigabit Ethernet
Adapter“.
To verify the driver of the adapter, follow the steps below to open the Device Manager on Mac®
 Please connect the USB to LAN device to MacBook / PC.
 Click the System Preferences → Network → USB Gigabit Ethernet device active on line.
Note: If there is a (question) or (exclamation) mark next to that item, then the driver is not
properly installed. Please delete the item, unplug the adapter and repeat the installation steps.
DRIVER UNINSTALLATION FOR ETHERNET PORT
Use Device manager → Add / Remove program (Programs) → Remove: ASIX AS88179 for Ethernet
drivers.
INSTALLATION for USB 3.0 PORTS
Windows, Mac and Linux: This HUB will be automatically detected and USB 3.0 ports will
automatically install immediately after connecting to the USB port on your notebook / PC.
SAFETY INSTRUCTIONS
 Keep this equipment away from fire, high humidity and temperature.
 Keep this User’s Manual for future reference.
PACKAGE CONTENTS
 i-tec USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter with built-in cable (17 cm)
 CD (Driver and User's manual)
 Quick Installation Guide
FAQ
Question: My computer cannot detect the device, or the HUBs function is limited.
Answer: Check drivers of USB 3.0 interface on your computer. These drivers must be up-to-date. For
further information check our website (section USB 3.0 PROBLEMS)