User Manual

6
|
USB 3.0 Metal Charging Hub
ENGLISH
DESCRIPTION
1. 7x output USB 3.0 ports for connecting USB equipment
2. LED diode – the diode is ON when the HUB is connected
to the power adaptor or to a USB port of a notebook / PC
3. Input for connecting the power adaptor
4. USB 3.0 cable type A for connecting to a notebook / PC
CHARGING
You can use external power adapter, if you connect printer,
scanner or other high power consumption devices to USB
ports in HUB (power adapter is included). Respect the basic
rules while using this power adapter (for ex. do not let in
reach of children, if the adapter is in 230 V circuit, do not put
it into the water and so on).
CHARGING
The HUB supports charging of the connected USB mobile
equipment such as smartphones (including iPhone and
Samsung phones), e-book readers, multi-media players,
GPS navigators, and tablets (e.g., Asus, Toshiba, GoClever,
Prestigio, Emgeton, Sencor). Using the original cable
connect the equipment to be charged to the USB port of
the HUB. At the same time the power adaptor needs to be
connected to the HUB as well.
INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 AND
HIGHER,
MAC OS X AND HIGHER
The HUB is installed automatically, no need install drivers.
Connect the connector of the power adaptor to the HUB and
connect the power adaptor to a socket outlet with 230V.
Then plug the HUB via USB cable into available USB port
(USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and
1
2
3
4