User Manual

ManualsBrandsi.Tech Dynamic ManualsAudio EquipmentBluetooth Stereo Headset

i.Tech BlueBAND R

Safety Information

• Check local laws regarding use of a mobile handset and Headphones

while driving. If you use the Headphones while driving, ensure your

attention and focus remains on your responsibility of driving safely.

• Never allow children to play with the Headphones – small parts may

be a choking hazard.

• Observe all signs that require an electrical device or RF radio product

to be switched off in designated areas. These could include hospitals,

blasting areas, and potentially explosive atmospheres.

• Turn off your Headphones prior to boarding an aircraft. Do not use

your Headphones in an aircraft.

• Never mount or store your Headphones over any air bag deployment

area as serious injury may result when an air bag deploys.

• Do not open or mutilate the built-in battery.

• Dispose of batteries according to local regulations. Do not dispose as

household waste

(Back Cover)

All rights in this publication are reserved and no part may be reproduced

without the prior written permission of the publisher. The contents of this

publication are believed to be correct at the time of going to press, but any

information, specifications, products or services mentioned may be modified,

supplemented or withdrawn without further notice.

The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring

Enterprises Limited or its affiliates.

Bluetooth

and the Bluetooth logos are trademarks owned by Bluetooth SIG,

Inc, USA and licensed to i.Tech Dynamic Limited.

Made by i.Tech Dynamic Ltd, a wholly-owned subsidiary of Hutchinson Harbour

Ring Limited.

i.Tech Dynamic declares under our sole responsibility that this product is in

conformity with the provisions of the following Council Directives 1999/5/EC.

Please dispose of this packaging and product in accordance with the latest

guidelines.

i.Tech BlueBAND R Overview

Getting Started

1. Volume Key (+) 6. Status Indicator

2. Volume Key (-) 7. Hold Key

3. Forward Key 8. Backward Key

4. Play / Stop Key 9. Charging Socket

5. Multifunction Button(MFB)

Fig. 1

2 3

To use your i.Tech BlueBAND R Headphones (“Headphones”), please

follow these simple steps:

• Charge your Headphones

• Pair your Headphones with a Bluetooth-enabled mobile handset or

music player

Charging Your Headphones

Connect the charger to an AC wall outlet and the charger plug to the

Headphones’s charging socket (fig.3). The Status indtcator will be red

while charging.

IMPORTANT Charging indication will be delayed for a few seconds if

the headset has not been used for a long time or the battery is drained.

Normal Charging Time

Charging the battery fully is normally within 3 hours. When the battery

is fully charged, the Status indtcator will turn blue and remains on.

Disconnect the charger from AC wall outlet and the headset. Press and

hold the MFB (fig.1) for 2 seconds to turn the headset on, please refer

to “Turning Your Headphones On and Off” on the next page. For pairing,

please refer to “Pairing your Headphones”.

Talk Time, Music Play Time & Standby Time

The fully charged battery offers up to 8 hours talk time, music play

time and up to 250 hours standby time. When no calls are in progress,

the headset remains turned on in standby mode.

Low Battery

When the headset is on and the battery becomes low, the Status

indtcator flashes red and the headset emits a beep every 1 minute.

Please recharge the battery as described above.

Turning Your Headphones On and Off

Turning On the Headphones

Press and hold the MFB for 2 seconds until you hear a short beep. The

status indicator will flash blue.

IMPORTANT Press the MFB again each time you turn on the headset

to reactivate pairing so that the connection between the headset and the

mobile handset is resumed. For pairing, please refer to “Pairing Your

Headphones”.

Turning Off the Headphones

Press and hold the MFB for 3 seconds until you hear a long beep. The

status indicator flash stops.

IMPORTANT To disconnect the Bluetooth connection, please firstly

turn of your headset by pressing the MFB key.

Pairing Your Headphones

1. Place the Headphones and the device where they are easily

viewable by no more than 1 meter apart.

2. Ensure the Headphones is OFF.

3. Press and hold the MFB until the Headphones Status Indicator

alternately flashes blue and red.

4. Activate your mobile handset’s Bluetooth function by referring to

your mobile handset user guide for details.

5. Set the device to search for Bluetooth devices within about 1 meter

as instructed in the mobile handset user guide and select “i.Tech

BlueBAND R” from the list.

6. Enter the preprogrammed passkey “8888” and press “OK” to pair

your Headphones and device. When the pairing is complete, the

Headphones Status Indicator will flash blue rapidly for 5 times

followed by a long beep.

7. Go back to your device’s main menu. For certain device models, a

headset / audio icon will be shown on the screen. You should now

be able to make and receive calls using your Headphones and listen

stereo music via your Headphones.

IMPORTANT If the pairing cannot be completed within 2 minutes

while the pairing mode is activated, the Headphones status indicator

flashes purple red with 3 beeps and the headset is turned off. Please

repeat Steps 2 to 7 to pair the headset and the mobile handset again.

Using Your Headphones

Answering a Call

When there is an incoming call, you will hear ringing through the

Headphones. Press the MFB to accept the call or answer the call via your

mobile handset in the normal way.

Answering a Call when Listening to Stereo Audio

Press the MFB once to answer the call and when finished, press the MFB

once to resume stereo audio.

If the other party you are speaking to ends the call, stereo audio will

automatically resume without having to pressing the MFB.

NOTE To receive stereo audio from your mobile handset or PDA, please

make sure they support the Bluetooth A2DP profile.

Ending a Call

Press the MFB to end your call or end the call via your mobile handset in

the normal way.

Rejecting a Call

To reject an incoming call during ringing of the headset, press and hold the

Volume Key for 2 seconds until you hear 2 beeps.

Dialing from Your Mobile Handset

Simply make calls on your mobile handset in the normal way.

Using Your Headphones

Voice Dialing from Your Headphones

If your mobile handset is equipped with a voice dialling function, simply

press the MFB on your headset and when you hear a beep, say the voice

tag.

IMPORTANT Please make sure to record voice tag into the mobile

handset first before using voice dialling function.

Last Number Redialling from Your Headset

Press the MFB on your headset twice.

IMPORTANT The above functions are only applicable to mobile handsets

with Bluetooth Handsfree Profile. Functionality varies depending on the

mobile handset model you have. Please refer to your mobile handset user

guide for additional information.

Listening to Stereo Audio from Your PC / Device

By connecting your Headphones to your PC through i.Tech mini Bluetooth

USB Dongle v1.2, you can listen to stereo audio from your PC (please refer

USB Dongle v1.2 Quick User Guide).

By connecting your Headphones to your Bluetooth-enabled music devices,

you can listen to stereo music from your music devices (please also refer

your music player user guide).

Care and Maintenance

Headphones

• Consider turning your Headphones off before placing it in your

pocket or bag. If the MFB is accidentally depressed, your mobile

handset may place an unintended call.

• Do not expose the Headphones to liquid, moisture or humidity as it

is not waterproof.

• Do not use abrasive cleaning solvents to clean the Headphones.

• Do not expose the Headphones to extremely high or low

temperatures.

• Do not dispose of the Headphones in a fire as it will result in

explosion.

• Do not expose your Headphones to contact with sharp objects as

this will cause scratches and damage.

• Do not stick anything inside the Headphones as this may damage

internal components.

• Do not attempt to disassemble the Headphones as it does not

contain serviceable components.

• If you do not use the Headphones for long periods, be sure to store

it in a dry place, free from extreme temperatures and dust.

Built-in Battery

• Do not attempt to replace the Headphones’s battery yourself as it is

in-built and is not changeable.

• Charge the battery in accordance with the instruction supplied with

this user guide.

• Only use the manufacturer supplied charger when charging the

Headphones.

Charger

• Only use the manufacturer supplied charger when charging the

Headphones.

• Do not disassemble the charger as it may expose you to dangerous

voltages of other risks. Incorrect reassembly can cause electric shock

when the Headphones is subsequently used.

• Do not use the charger outdoors or in damp areas.

• Only charge the Headphones’s built-in battery in accordance with the

instructions of this user guide.

• Avoid charging the Headphones in extremely high and low

temperatures.

Troubleshooting

If you are unable to connect your Headphones and mobile handset, please

try the following:

• Ensure your Headphones is turned off and is properly charged.

• Ensure the Headphones is paired with your mobile handset.

• Ensure your mobile handset’s Bluetooth feature is activated. Please

refer to your mobile handset user guide for specific instruction.

• Ensure the Headphones is within a maximum of 10 meters of your

mobile handset(s) and there are no obstructions, such as walls or other

electronic devices in between.

If the above steps do not solve your problem, please recharge the

Headphones and remove your mobile handset battery for a while.

The i.Tech BlueBAND R Headphones is compliant with and adopts the

Bluetooth Specification 1.2. However, interoperability between the device

and other Bluetooth-enabled products is not guaranteed because it

depends on compatibility. For more information on the compatibility

between the device with other Bluetooth-enabled products, please check

with the manufacturer or browse http://www.itechdynamic.com

Declaration of Conformity (DOC)

We, i.Tech Dynamic Ltd., declare that the following product:

Product Name: i.Tech BlueBAND R

Model No.: C51-A05146-XX

Is in conformity with the following essential requirements of Council

Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b

and 3.2. and the product is manufactured in accordance with Annex II of

the above directive.

A copy of the Declaration of Conformity can be found at:

http://www.itechdynamic.com

Product Specifications

Bluetooth Specification: Version 1.2 Class 2

Bluetooth Profile Supported: Headset, Handsfree, A2DP and AVRCP

Range of Frequency: 2.4GHz Spectrum

Dimensions: 134 mm (L) x 105 mm (W) x 69 mm (H)

Nominal Charging Time: Within 3 hours

Talk Time*: Up to 8 hours

Music Play Time*: Up to 8 hours

Standby Time*: Up to 250 hours

Weight: 79.5 grams

*may vary due to users’ operation mode and mobile phone settings

Charging

Socket

Charger

Charging Your Headphones

Fig. 3

The Headphones comes with a built-in rechargeable battery. Prior to

using the headset, it is recommendable to charge the battery fully for

the first time.

Charger Plug

Pairing Your Headphones

Prior to using your Headphones for the first time, you must pair it with a

Bluetooth-enabled mobile handset or Music Player (The “Device”).

The information on the next page describes pairing instruction for typical

Bluetooth-enabled mobile handset or music player. Headphones pairing

procedure is subject to different models of mobile handsets and music

player.

Remote Control Function (AVRCP)

Play / Stop

1. Press “ ” once for start music playing

2. Press and hold “ ” for 3 seconds to stop the music playing

Volume Control

By pressing the “+” to increase the audio volume. By pressing the “-“ to

decrease the audio volume. Total audio level is 12.

Forward

By scrolling the panel upward to skip next chapter or forward selecting

the chapter.

Backward

By scrolling the panel downward to repeat last chapter or backward

selecting the chapter.

Contents

i.Tech BlueBAND R Overview ............................................................................... 1

Wearing Your i.Tech BlueBAND R Headphones .............................................. 2

Charging Your Headphones ................................................................................. 3-4

Charging Your Headphones .................................................................. 4

Normal Charging Time ........................................................................... 4

Talk Time, Music Play Time & Standby Time ................................... 4

Low Battery ............................................................................................... 4

Turning Your Headphones On and Off ............................................................. 5

Pairing Your Headphones .................................................................................... 6-7

Using Your Headphones ....................................................................................... 8-9

Answering a Call ...................................................................................... 8

Answering a Call when Listening to Stereo Audio ........................ 8

Ending a Call .............................................................................................. 8

Rejecting a Call ......................................................................................... 8

Dialing from Your Mobile Handset .................................................... 8

Voice Dialing from Your Headphones ............................................... 9

Last Number Redialling from Your Headset ................................... 9

Listening to Stereo Audio from Your PC / Device ........................... 9

Adjusting the Volume ............................................................................................ 10

Remote Control Function (AVRCP) ..................................................................... 11

Care and Maintenance ........................................................................................... 12-13

Safety Information .................................................................................................. 14

Troubleshooting ...................................................................................................... 15

Declaration of Conformity (DOC) ....................................................................... 16

Product Specifications ........................................................................................... 17

Fig. 2 Wearing your Headphones

Wearing Your i.Tech BlueBAND R Headphones

171

www.itechdynamic.com

Printed in China

Resetting / removing the pairing

Press the Volume Key repeatedly until you reach the desired volume level.

Adjusting the Volume

Volume Key -

Volume Key +

1. Connect the charger into the headphones’s charging socket.

2. Press and hold any one of the Volume Keys for 20 seconds until the

status indicator flashes blue and red alternately, then release it.

3. Press and hold any one of the volume keys again for 2 seconds until

the status indicator flashes purple light, then release it.

4. Recharge the headset for a few seconds.

The headphones is turned off and returned to the original settings. All

current pairings are cleared.

116

152

314

134

512

116

710

15.105(b)

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may

cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. End users must follow the specific operating

instructions for satisfying RF exposure compliance. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the

part responsible for compliance could void the user’s authority to operate the

equipment.

P/N S3J-51A05146-01-F

(Page 17)

(Page 0)

(Page 1)

(Page 16)

(Page 15)

(Page 2)

(Page 3)

(Page 14)

(Page 13)

(Page 4)

(Page 5)

(Page 12)

(Page 11)

(Page 6)

(Page 7)

(Page 10)

(Page 9)

(Page 8)