User's Manual

www.tuv.com
Test Report No.: 14014342 001 Appendix 4 page 27 of 38
(Page 11)
Resetting or Removing Pairing
You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings.
1. Insert the charger plug into the headset’s charging socket
2. Press and hold either of the volume keys for 20 seconds until the status indicator flashes purple rapidly.
3. Release the volume key.
4. Press and hold the volume key again until the status indicator is purple.
5. The headset is reset and will resume the charging mode.
Note: After resetting, all previous pairing settings are cleared.