Southwestern Bell Freedom Phone 5.8GHz Cordless Telephone With Call Waiting Caller ID PAGE GH5810US Owner’s Manual Toll Free Helpline 1-800-366-0937 http://www.swbfreedomphone.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS.......................................3 SAFETY INSTRUCTIONS FOR BATTERIES...............................4 NAME OF CONTROLS AND INDICATIONS.................................5 FCC WANTS YOU TO KNOW.....................................................8 INTRODUCTION ABOUT GH5810........................................................................10 FEATURES............................................................................10 BOX CONTENTS.........................
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
SAFETY INSTRUCTIONS FOR BATTERIES Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone approved battery pack in the handset of your GH5810 Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discarding or charging batteries. When handling the batteries, be careful not to short the battery with conducting materials such as rings, bracelets, and keys.
NAME OF CONTROLS AND INDICATIONS Handset Controls, Indicators Receiver Volume Switch New Call Indicator Flashes to indicate there are calls that have not been reviewed -To adjust the receiver Earpiece Caller ID Calls Button LCD Display User to dial the displayed number Talk button Used to make or to terminate calls Memory Button User to store or recall numbers in memory Delete Button Used for deleting caller ID entries Keypad Number buttons Headset Jack Caller ID Review buttons Flash Button Me
NAME OF CONTROLS AND INDICATIONS LCD Display Indicator Repeated Call Indicator RING OFF Indicator Clock New Call/ Call Counter Date VIP Indicator 12-digit Number Line NEW CALL/ CALL COUNTER REPEATED CALL INDICATOR CLOCK DATE 12-DIGIT NUMBER LINE 12-CHARACTER TEXT LINE VIP INDICATOR RING OFF INDICATOR 12-character Text Line Shows the amount of calls in standby mode. When there is a new call that has not been reviewed, the display will show “NEW CALL” and the new CALL LED on the handset will blink.
Base Unit Controls and Indicators Telephone Line DC In 9v DC 300mA Connect the telephone line cord here Connect AC adaptor cord here USE ONLY WITH CLASS2 POWER SOURCE 9V DC 300 m A TEL LINE In Use/Charge LED Lights when the handset is in TALK mode or the handset is on the cradle and the battery is being charged.Flashes when an incoming call is received.
FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:47GW902BGH5810US.If requested, This number must be provided to the telephone company . An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i,e.,RJ11C) in the packaging with each piece of approved terminal equipment .
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.
INTRODUCTION About the GH5810 The GH5810 is a 5.8GHz Cordless Phone with Caller Identifier . It is designed and engineered to strict standards for reliability, long life, and outstanding performance. FEATURES Caller ID (60 call data memory locations) with call waiting 40 Channels (auto or manual selection) 10-Number One-touch Dial Memory Direct dialing from caller list Extended battery life Digital security coding The GH5810 features include AutoTalk TM and AutoStandby TM .
INTRODUCTION (CONT.) Box Contents 1Base unit 1 Handset with rechargeable batteries Quick installation guide Registration card AC adaptor with cord (9V 300mA) Memory card Telephone line cord NOTE: a. Keep the shipping carton and packaging, in case you need to transport your phone. b. If any of these items are missing or damaged, contact your place of purchase. Preliminary Preparation / Telephone Line Installation 1. Never install telephone jacks during a lightning storm. 2.
INSTALLATION Desk or Table Installation 1. The GH5810 base unit has built-in wall mount hanger holes. There is no bracket to assemble. Simply take the base unit out of the box. 2. Plug the AC adaptor cord into the 9V DC-300mA input jack on the Base unit. 3. Plug one end of the telephone cord into the TEL LINE jack on the Base unit. 4. Plug the other end of the telephone cord into the telephone wall jack. 5. Plug the AC adaptor into a standard 120V AC wall outlet.
INSTALLATION (CONT.) Wall Mounting 1. If using a standard wall plate, this step is not necessary. Place the Desk/ Wall bracket on the wall and mark the location of the screws. Install the screws leaving 3/16" extending out from the wall. Use anchors to secure screws. 2. To connect the Desk/Wall bracket in the wall mount position, simply align the bracket with the slots on the base until it is securely in place. USE ONLY WITH CLASS2 POWER SOURCE TEL LINE 9V DC 300 m A 3.
INSTALLATION (CONT.) Handset Battery Charging The battery pack in the handset must be fully charged for about 10 hours before using the telephone. After connecting to AC power, leave the handset unused in the cradle for ten to fourteen hours. Later, it will take less time for the battery to recharge. The IN USE/ CHARGE LED on the base will be lit when the handset is in the cradle. NOTE: a. When the battery gets low, the LCD will show “BATTERY LOW” indicator, and the unit will beep every 15 seconds. b.
HANDSET SETUP Overview To go to set up mode, press and hold FLASH/PROG key for 2 seconds. The following modes will set by be pressing FLASH/PROG key. Set Language Area Code Contrast Time Setting Tone/Pulse Ring OFF/LO/HI Ring Type A,B Auto Talk on/off. Press the (FLASH/PROG) key to advance to the next setting. Press and hold the (FLASH/PROG) key to exit the menu. To Set Language Press the( )or( ) key to change to English, French or Spanish. The language will change to allow user to choose the language.
HANDSET SETUP (CONT.) To Set TIME/DAY Use the number pad to change the date and time. Enter the date as month/day (mm/dd) as you enter each digit, the next digit will BLINK. 12:00 Enter the month first then enter tne day: Example: For Jun 24 enter 0 6 2 4 AM 1/01 SET TIME ? Next enter the time. User military time to enter the time correctly. Examples: For 2:52 PM enter 02 52 For 11:27 AM enter 11 27 Next enter the AM or PM. Press the ( ) or ( ) key to change the AM/PM.
HANDSET SETUP (CONT.) To Set Ring Type A,B Press the( )or( )to change the setting. The ringer will ring to allow you to choose the ring tone that you desire. (FLASH/PROG) will end the program sequence. RING TYPE:A To Set Auto talk on/off Press the ( )or( ) to change the on/off setting. TERMINATION OF PROGRAM MODE: AUTO TALK OFF The last (FLASH/PROG) key action will terminate the program mode.
TELEPHONE OPERATION search and select the clearest channel when you press the CHANNEL button.If you hear noise or other interference during your conversation, you can manually select a clearer channel by pressing and releasing the CH button on the handset to switch to another spare channel. Your call will not be interrupted. Digital Security System Your GH5810 Cordless Telephone is equipped with a digital security coding system to protect your base unit from being accessed by other cordless telephone.
TELEPHONE OPERATION (CONT.) Making a Call Temporary Tone ( ): In Pulse dialing mode, you can access bank facilities, telephone answering machines, etc., by simply pressing the TONE(‘ ’)key to get into the tone mode and input the required tone codes. It will reset automatically after you end your call. 1. Lift the handset and press the TALK button to be connected to the phone line. The LCD display will show “TALK” and the TALK timer will start. The IN USE/ CHARGE LED on the base will light. 2.
TELEPHONE OPERATION (CONT.) base for 4 seconds,the handset will beep for 60 seconds . Press any key on the handset to stop paging. Out of Range If you try to place a call when you are too far away from the base, you will hear static. If this occurs, move closer to the base. Flash PAGE You can use your cordless telephone with special services such as Call Waiting or Three Way Calling (Special subscription from your local telephone company is required).
TELEPHONE OPERATION (CONT.) available location. 4. Dial phone number (up to 16 digits). Each TONE(*) entered uses one of the available digits. If you pause more than 10 sec onds in programming, the unit will exit the memory programming. If you accidentally press a1f7-th digit, 3 error tones will sound, press DEL button to erase digits. 5. Press the MEM button again the LCD will show “ location ?X” or press CH button to exit. 6. Press MEM button again to confirm. or press desired memory location.
CALLER ID OPERATION 2. When you access the Call Waiting call, the Caller ID information will disappear and the Time/Day screen will be displayed. Receiving a Call After the first ring, the caller’s name and telephone number will be displayed on the LCD. The New Call LED on the antenna will flash until you review ALL your new calls. IMPORTANT: You must subscribe to Call Waiting and Call Waiting Caller ID service from your local telephone company in order to receive Call Waiting Caller ID information.
CALLER ID OPERATION NOTE: If you do not review all new calls, the Time/Date screen will display after 10 seconds and the new call counter will show the total number of new calls received(including those you just reviewed). (1) 10 digits without a 1 prefix, and (2) 10 digits with a 1 prefix (3) 10 digits without a 1: In some areas of the country,the area code must be included even when dialing a local call. In this situation, set your GH5810 area code to another 3 digits not being used in the U.S. (i.e. 100.
CALLER ID OPERATION (CONT.) To Store a Caller ID Number to Memory 2. While the display is showing any CID number, press and hold the DEL button for 2 seconds. The display will show “ DELETE ALL ?” on the bottom line. 3. Press the DEL button. All viewed calls will be erased. 1. Press or buttons to select number from Caller ID list. 2. Press MEM button. The LCD display will show “LOCATION ? X”. 3.Press the location number. The LCD display will show “ MEM X STORED “.
CALLER ID OPERATION (CONT.) NOTE: 4beeps will also sound when the incoming VIP call is a Call Waiting call. To Remove a VIP Call: 1. Press the or to select the call you have marked “ VIP”. 2. Press and hold the CALLS button for 2 seconds. The “VIP” icon will disappear. To Easily Change the LCD Contrast 1. Press the FLASH/PROG button IN ONHOOK mode. 2. Press the ( )or( ) key to change the contrast. 3. The contrast will change to allow user to choose the contrast level. 4.
TROUBLE SHOOTING If your GH5810 is not performing to your expectation, please try these simple steps. PROBLEM SUGGESTION Charge light won’t come on when handset is placed in the base unit. Make sure the AC Adapter is plugged into the base unit and wall outlet. Make sure the wall outlet is functioning. Make sure the handset is properly seated in the base unit. Make sure the rechargeable battery pack is properly placed in the handset. No dial tone Charge the handset for 10 hours before initial use.
TROUBLE SHOOTING (CONT.) PROBLEM Conversation is interrupted frequently or Static noise is present during conversation SUGGESTION Move closer to the base. Press the CH button to switch to a clearer channel. Handset does not display any Caller ID message Check with your local telephone company to make sure Call Waiting Caller ID service is being provided on your telephone line. If you pick up the telephone before the first complete ring, the caller information will not be completely received.
PRODUCT CARE A. Avoid putting cordless phones near heating appliances and devices that generate electrical noise (motors, fluorescent lamps, etc.). B. Avoid rough treatment of the phone by placing the handset gently into the base when hanging up. Avoid dropping the handset. C. Clean your cordless telephone only with a soft cloth slightly dampened with water or mild hand soap. Do not use any type of solvent or abrasive cleaner. Before cleaning, always un-plug the phone from the wall outlet. D.
SERVICE According to FCC regulations, this equipment, which has been certified and registered by the FCC, may only be repaired by authorized persons. If repairs or adjustments are made by an unauthorized person, the FCC certification may be voided.
LIMITED WARRANTY This Southwestern Bell Freedom Phone is warranted to the original purchaser to be free from defects in materials and workmanship under normal installation, use, and service for a period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
STOP...DON’T TAKE ME BACK TO THE STORE. LOOK...FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER. LISTEN...AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call the SOUTHWESTERN BELL FREEDOM PHONE RETAIL SALES HELP LINE AT: 1-800-366-0937 Monday - Friday 8:30a.m. - 9:00p.m. EST Saturday 8:30a.m. - 12:30p.m. EST http://www.swbfreedomphone.com SOUTHWESTERN BELL FREEDOM PHONE 7475 N. Glen Harbor Blvd.