5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 ` USER’S MANUAL MODEL : 5.8GHz CORDLESS PHONE 35290, 35291, 35292, 35293, MB5290, MB5291, MB5292, MB5293 Written By S.K.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 TABLE OF CONTENTS 1. FCC INFORMATION--------------------------------------------------------------------------------------- 3 2. FUNCTIONAL SUMMARY ------------------------------------------------------------------------------10 2.1. Scope…………………………………………………………………………………………………………10 2.2. Features.……………………………………………………………………………………………………..10 3.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 1. FCC INFORMATION READ THIS BEFORE INSTALLATION Your telephone conforms to federal regulations, and you can connect it to most telephone lines, However, each device you connect to the phone line draws power from the phone line. We refer to this power draw as the device’s ringer equivalence number, or REN.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 4) The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 1. Use only the following type and size battery (ies) 2. Do not dispose of the battery (ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery (ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. In may be toxic if swallowed. 4.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 9. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks, incorrect reassembly can cause electric shock when the appliance is subsequently used. 10.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 SAVE THESE INSTRUCTIONS CAUTION: To reduce the risk of fire on injury to persons, read and follow these instructions. 1.Use only the battery (ies) instructed.: D-AAA300mAh*3 3.6V 2.Do not dispose of the battery (ies) in a fire. The cell may explode. 3.Do not open or mutilate the battery (ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It maybe toxic if swallowed. 4.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 FCC AND OTHER INFORMATION If requested by the telephone company, inform them as follows: • FCC registration no. (found on the bottom of the unit) • Ringer equivalence (found on the bottom of the unit) • The particular telephone line to which the equipment is connected. This unit must not be connected to a coin operated line. If you are on a party line, check with your local telephone company. RINGER EQUIVALENCE NO.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 CAUTION : To assure continued compliance with FCC rules, do not make any unauthorized modifications. When programming emergency numbers AND/OR marking test calls to emergency numbers 1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. 2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 - The possible calling distance may be shortened when the unit is used in the following places : near obstacles such as hills, tunnels, underground, near metal objects such as wire fence. - Do not place heavy objects on top of this unit. - Place the unit on a flat level surface, or use the wall mounting Adaptor for wall installation. Damp basements should also be avoided.
5.8GHz ASIC Analog Multi Hand CID MODEL : 2. Revision : 01 Revision Date : 2007/JUN/01 FUNCTIONAL SUMMARY 2.1. SCOPE This specification defines the product features and requirements of the NWB, 40 channel 5.8GHz/2.4GHz Analog handy cordless telephone featured with CID type 1.0/2.0 2.2. FEATURES: ⇒ ⇒ ⇒ ⇒ 5.8GHz / 2.4GHz Analog Caller ID type 1.0/2.0 for models. Multi handsets: Max 3 Handsets Page button on the base unit.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 ⇒ Adaptor : 9VDC/300mA ( BSAE ) , 9VDC/150mA(CHARGER) ⇒ Battery : 3.6V/400mA ( AAA Size ) 2.2.1 BASE Written By S.K.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 2.2.2 HANDSET Written By S.K.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 2.2.3 CHARGER Written By S.K.
5.8GHz ASIC Analog Multi Hand CID MODEL : 3. Revision : 01 Revision Date : 2007/JUN/01 USER INTERFACE DESCRIPTION 3.1.INITIAL FACTORY SETTINGS: Time Set Ringer Level Contrast Language set Volume Control: Ringer Level Flash Time TALK Button LEDs” All memories: 12:00am 1/01 On (Default setting) 3 (Default setting) English 3 (Default setting) On (Default setting) 600 OFF OFF Reset 3.2.DEFAULT SETTINGS: 3.2.1.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 3.3.2.Ring: 3.3.2.1. Incoming call Ring : Shall meet the 1.5 Standards & References. 3.3.2.2. Distinctive Ring from CO: To support telephone-company-supplied Distinctive Ringing features, the unit ringer(s) shall reproduce ring cadences present on the telephone line, according to detailed requirements referenced by Distinctive Ring Timing, in standard specification 3.3.2.3.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 3.4 DISPLAY: 3.4.1 LED : The following illumination cadences shall indicate that… Off On (Solid) Slow Blink Indicate no action is in progress. Indicate a steady action in progress. Warning for temporary stop action or for some change in progress. Blink Time (ms) ON Time (ms) OFF Fast Blink 1 500 500 2 500 500 Warning for temporary action in progress. Blink Time (ms) ON Time (ms) OFF 1 100 100 2 100 100 3.4.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 3.4.4. LCD on the Hand set: 3.4.3.1. LCD Characteristics: Three lines on the xxx mm x xxx mm - 1st line: Icon - 2nd line:14 alphanumeric digits dot matrix for Name or mode indication - 3rd line: 14 Digits ×7Segments - 4th line: Time (HH:MM AM/PM), REP, Date(MM/DD), NEW/MEMO 3.4.3.2. Detail LCD Drawing Written By S.K.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 3.5. OPERATIONAL DESCRIPTION: 3.5.1. Handset: The unit shall provide audible feedback for keys depressed. NAME USER INTERFACE NO When incoming call, press TALK key to accept the call. When line is not in use, Press TALK key to initiate a call. The unit shall establish an RF link between the base and the handset. The base shall seize the line, routing audio to and from the handset.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 The LCD will Display “ALL ERASE?” Press the [ch/del] button. Selective deleting in the PHONEBOOK. Press the [Memo] button. The LCD screen will display “DIRECTORY” Press the SCROLL UP [▲] or down [▼] button to find the record you want to delete. Press the [ch/delete] button. The LCD will Display “ERASE?” The LCD screen will display the next record in the Memo. Press the [end/exit] button to return to STANDBY mode.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 on the LCD. [Method 1] Press the [▲] or [▼] to change the RING on/off setting Press the [EDIT] button Press the [▲] or [▼] to change the RING On or OFF. If user desires the ring level, will be ring during for 2seconds. Press the [SAVE/Trans] button [Method 2] Press and hold the [*] to change the ringer ON/OFF setting in stand by mode. The ringer will ring to allow you to choose the ring level that you desire.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 Press the [SAVE/edit] 8 Memo(Phone Book) h. Voice Mail setting. Shall be displayed “VOICE MAIL” on the LCD. Press the [▲] or [▼] button to change Press the [EDIT] button. Enter the voice mail Post code number by the Key pad [0]~[9] buttons. Press and hold the [SAVE/Trans] button i. MSG Waiting ON/OFF Press the [▲] or [▼] button select the MSG WAITING ON. Press the [EDIT] button.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 letter or number want to change. To erase, press the [ch/DELETE] . To add, use the Key pad [0]~[9] buttons. Press [▲] or [▼] button to edit the number. Press the [ ] or [ ] button to move the cursor to the digit want to change. To erase, press the [SCAN/DELETE] . To add, use the Key pad [0]~[9] buttons Press and hold the [SAVE/Trans] button. Placing Calls from the Memo. Press the [Memo]. The LCD will display “DIRECTORY”.
5.8GHz ASIC Analog Multi Hand CID MODEL : Revision : 01 Revision Date : 2007/JUN/01 shall be.: Press this button, then Tone dialing shall be active until the unit is placed on hook. Pulse dialing shall be reselected when the unit is next taken off hook. 13 Call Back standby mode Press the [▲] or [▼] button to find the Caller ID record Press the [Talk] button. 14 Volume up/down OFF HOOK - Volume up or down function by volume switch. 15 CID Review up/down ON HOOK - Review CID.