Instruction Manual

121
5-4. ezClock - Auto-synchronized time
Sometimes the NVR’s clock time can become behind or forward compared to the actual time.
ezClock will automatically adjust the user’s NVRs clock every once in a while, depending on the
user’s setting in the ezClock setup. This section will show the user how to set up ezClock.
Step 1. ClickezClock” fromezTools
Step 2. Check “Run ezClcok when windows starts to automatically run ezClock when the user turn
on the PC.
Step 3. Click ezClock Setupbutton and type the user’s favorite Time Server’s DNS address or IP
address that the user would like to use to synchronize the NVR’s clock, or simply keep the
default Standard Time Server as it is.
Step 4. Type the duration to synchronize the clock of Witness Pro with the selected Time Server in
Synchronize Every field.
Step 5. Click to test the local time and Server time.
Step 6. ClickOK to complete the setup.