Instruction Manual

137

6-2-1. Connect to NVR site - Basic Operation

Function description for the diagram of “Connect to NVR site “.

1. Select the communication way via IP address, ID code or Group no.

2. Select the LAN card if the system support more than 1 pc LAN card.

3. Choice the NVR name first which you want to connection, entry the IP address or ID code, and type

the port number of NVR. The default port number is “1001”. If you choice the “Group no”

communication, please setup the Group connection first.

4. The User name / Password must be matched with the NVR or Group which you want to connect.

5. Select the remote access video mode such as “Live video”, “Remote download” or “Remote

playback” from drop-down menu of Initiate tab.

6. Select the image size (Full size or Half size) for remote live video access from drop-down menu.

7. Select the Compression way from drop-down menu.

8. Setup the NVR connection information; please refer to the detail setting form next chapter.

9. Setup the Group connection information; please refer to the detail setting form next chapter.