Instruction Manual

b.) Limited recording day(s): The system will start to delete the oldest video clips when the

recorded videos are over the set period.

 Raid HDDs status:

This tab will show on the screen when the NVR had been installed the Raid card. Click the “Raid

HDDs status “ tab will show the diagram widows as below for checking the Raid HDD status and

setting Raid card parameters.

Setup the RAID parameters:

1. Please click icon on the screen of System control panel or “Advance “ tab (You will see

the diagram as below) to setup the parameters when install new hard disks, replace fail HDD or

adjust the RAID parameters. Please follow up the process as below, and then entry the User

name /Password: RAID/hpt (default) to login for the RAID parameters setting.