Manual

5
1-2. Specification:
1-3. Pin assignment:
PTI-100 POS Text Inserter
z RS-485
Y: Transmitter (+) Z: Transmitter (-) A: Receiver (+) B: Receiver (-)
z USB Cable
Black: Ground Green: Data (+) White: Data (-) Red: DC5V (+)
z 8 Pin dipswitch
S1-- ↑OFF: Using serial port printer ↓ON: Using parallel port printer.
S2-- ↑OFF: Transmit POS transaction text via TCP/IP.
↓ON: Transmit POS transaction text via RS-485.
S3-S4: Baud rate setting, (Default is 9600BPS). Please refer to the Table 1.1:
1. Please ignore the baud rate setting if the POS uses the parallel port printer.
2. Please reboot the power of PTI-100 when you setup the Dipswitch. The PTI-100 needs to
share power from USB port of POS machine or plug DC 5V switching power adapter.
Item \ Model
PTI-100 EX-400USB
Function
POS text inserter Transaction text data
Communication
RS-485 full duplex up to 1.2Km using twisted pair cable
Baud Rate
19200/ 9600/ 4800/ 2400 BPS
Interface
Series, Parallel and RS-485 4 ports RS-485 interface
Dimension
135 x 110 x 35 mm 120 x 100 mm
Power
DC 5V/250mA DC 5V/500mA
Tempe ra tu re
Operation: 0-70℃, Storage: -10-80℃ (Non- Condensing)