User's Manual

IAdea 15.6” All-In-One Meeting Room Signboard with Touch

Installation:

Signicant temperature deviations and changes in elevation or environment

can lead the glass panel of the smart signboard to trap a slight amount of

moisture. To avoid damaging the smart signboard, the condensation will re-

quire at least 2 - 4 hours to evaporate prior to usage.

Users are recommended to keep the ush mount bracket in direct contact with

the to-be-mounted surface when operating the smart signboard to ensure the

weight of the device is fully supported by the ush mount.

Mounting with ush mount bracket and screw

Mounting with VESA compatible mounting interface

This smart signboard accepts a MIS-D (100 mm x 100 mm) VESA-Compliant

mounting interface and the recommended screw is M3 x 7.5 mm exclud-ing

bracket thickness. Use the ush mount screw provided in-box to easily install

the ush mount bracket onto the smart signboard.

Secure the smart signboard to the

bracket by joining the pocket at the

back of the smart signboard to the

hook located at the top section of the

bracket.

Mount the bracket to the to-be-

mounted surface with the supplied

KA4 x 30 mm screws.