User's Manual

5
IAdea 15.6” All-In-One Meeting Room Signboard with Touch
Copyright© 2018 IAdea all rights reserved
1
Setting Up:
Plug in the AC adapter and Ethernet cable
(if that is the preferred method of con-
necting to network) located at the back of
the smart signboard and it will power on
automatically. Once the user has exited
the boot up screen, users can go through
system congurations in both landscape
and por-trait orientations.
2
When boot up is complete, the user will
see the “Basic settings” which allows the
user to make congurations or autoplay
pre-loaded content. Please note, the smart
signboard is set to autoplay pre-loaded
content 15 seconds after boot up. This can
be canceled if “Cancel autoplay in 15s”
is selected which lets the user remain on
the “Basic settings” and initiate playback
manually.
Firmly slide the smart signboard down-
wards to ensure the pocket and the hook
are properly latched together.
3
Fasten the ush mount bracket screw,
which is only accessible from the bottom
plane of the mounted smart signboard, by
using a Phillips-head screwdriver.
4