Owner's manual

6. Operation of SEP Controllers

6.3 Initial Setting

When the power is turned on for the first time after the delivery of the controller, the initial setting

screen will appear.

x Select [Yes], and the display will change to the I/O setting screen where you can set the

operation pattern (PIO pattern). Select a desired operation pattern and, depending on the

selected operation pattern, also set the single-solenoid, double-solenoid or other operation mode.

x Select [No], and the factory set operation pattern, or specifically operation pattern 0 of double-

solenoid mode, will remain effective.

Factory settings

x Operation pattern 0

x Double-solenoid mode with

continuous current flow

x No servo control

x Home return MANU

x Output mode LS

[Refer to 6.10, “I/O Setting.”]

[Refer to 6.9, “Position Setting.”]

Yes

6.4