Instruction Manual

6. Operation of SEP Related Controllers
163
[1] Basic operation
[I/O test]
ON/OFF of input signals can be monitored.
The output signals OUT0 to OUT3 can be forcibly output by touching
each signal.
Touch [Menu] to return to the test menu screen.
[Pos Test]
The operating method is explained using an example of operation pattern 0.
Touch [Menu] to return to the test menu screen.
x Backward :Touching [Backward] moves the actuator backward.
x Forward :Touching [Forward] moves the actuator forward.
x Stop :Touching [Stop] is stopped.
x Vel Override :The speed override changes to 10%, 50% and 100% every time [Vel Override] is
touched.
The current axis position is indicated.
The axis speed is indicated.
The electric rated current ratio/current value of the
axis is indicated by a percentage of the rating.