Instruction Manual

5. Operation of CON Related Controllers

5.9.1 Jog/Inching Operation

[Jog operation]

You can perform jog operation.

operation on the jog screen

x [Jog-], [Jog+] : The axis jogs while each button is touched. [Jog-] moves the axis in the negative

direction, while [Jog+] moves the axis in the positive direction.

x [SV ON] :Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.

Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.

x [HOME] :Touching [HOME] while home return is not yet completed causes the axis to return

home and { becomes lit.

x [Chg Vel] :The jog speed changes in the order of 1, 10, 30, 50 and 100 mm/s every time [Chg

Vel] is touched.

x [Inching] :Touching [Inching] changes to the inching screen.

x [Menu1] :Move to the Menu 1 screen.

x [MV_Menu] :Touch [MV_Menu] menu to return to the test run menu.