Instruction Manual

5. Operation of CON Related Controllers
71
[Inching Operation]
You can perform inching operation.
Operation on the jog screen
x [Inching-], [Inching+] :Touching each button once moves the axis by inching.
[Inching-] moves the actuator in the negative direction.
[Inching+] moves the actuator in the positive direction.
x [SV ON] :Touching [SV ON] while the servo is off turns on the axis servo and { becomes
lit. Touching [SV OFF] when the servo is on turns off the axis servo and {
becomes unlit.
x [HOME] :Touching [HOME] while home return is not yet completed causes the axis to
return home and { becomes lit.
x [Chg Dis] :The inching distance changes in the order of 0.01, 0.10, 0.50, 1.00 and 5.00
mm every time [Chg Dis] is touched.
x [Jog] :Touching [Jog] changes to the jog screen.
x [Menu1] :Move to the Menu 1 screen.
x [MV_Menu] :Touch [MV_Menu] menu to return to the test run menu.