Instruction Manual

5. Operation of CON Related Controllers

5.9.2 Position Movement Operation

Move to a position or continuously to multiple positions registered in the position table.

x [SV ON] :Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.

Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.

x [HOME] :Touching [HOME] while home return is not yet completed causes the axis to return

home and { becomes lit.

x [n], [p] :Touch [n] and [p] to select a desired position number. The target position of the

selected position number appears.

x [Chg Vel] :The speed override changes to 10%, 50% and 100% every time [Chg Vel] is touched.

x [Move] :Touching [Move] moves the axis to the target position. The current position can be

checked by the display in Current Pos.

x [Continuous] :Touching [Continuous] moves the axis continuously until Stop is touched.

x [Stop] :Touching [Stop] stops the axis.

x [Menu1] :Move to the Menu 1 screen.

x [MV_Menu] :Touch [MV_Menu] menu to return to the test run menu.