Instruction Manual

5. Operation of CON Related Controllers

5.9.3 Direct Movement Operation

A position is specified directly to move the axis.

x [SV ON] :Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.

Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.

x [HOME] :Touching [HOME] while home return is not yet completed causes the axis to return

home and { becomes lit.

x [Target Pos] :Touching [Target Pos] displays the numeric keypad. Enter a desired target position

and then touch [ENT].

x [Velocity] :Touching [Velocity] displays the numeric keypad. Enter a desired speed and then

touch [ENT].

x [Move] :Touching [Move] moves the axis to the target position you have set. The current

position can be checked by the display in Current Pos.

x [Stop] :Touching [Stop] stops the axis.

x [Menu1] :Move to the Menu 1 screen.