Instruction Manual

1. Specications Check
13
1.2.3 Driving System and Position Detector
Ball Screw type
Axis
Motor Type
[W]
No. of
Encoder
Pluses
Lead
[mm]
Type
Diameter
[mm]
X1-axis 400 16384 30 Rolled I16
X2-axis 400 16384 30 Rolled I16
Y-axis 400 16384 30 Rolled I16
Z-axis 50 16384 10 Rolled I8
1.2.4 Positioning Accuracy
Item Specifications
X direction ±0.02 mm
Y direction ±0.02 mm
Positioning Repeatability
Z direction ±0.02 mm
X direction 0.05 mm or less
Lost Motion
Y direction 0.05 mm or less
The values shown above are the accuracy at the delivery from the factory.
It does not include the consideration of time-dependent change as it is used.