Instruction Manual

4. Maintenance Inspection

3) Slide in the motor to the main body and temporarily tighten the four screws to hold the motor

(at the circled places and 2 places on the bottom).

Tighten the coupling screw (at the circled places).



4) Tighten the four screws affixing the motor (at the circled places and 2 places on the bottom).

Tool to use: Hex Wrench 4mm-sized

Coupling

Tool to use: Hex Wrench 2.5mm-sized

Tightening Torque : 83N

•cm

Tool to use: Hex Wrench 4mm-sized

Tightening Torque : 342N

•cm