Instruction Manual

4. Maintenance Inspection
58
4) Tighten the screws affixing the motor (at the circled places).















5) Plug in the motor cable and ribbon cable, and clamp them with cable bands.




6) Tighten the screws holding the screw cover and remove the screw cover.





















Cable Band
Screw Cove
r
Tool to use: Hex Wrench 2.5mm-sized
Tightening Torque : 88.7N
•cm
Tool to use: Hex Wrench 3mm-sized
Tightening Torque : 176N
•cm