Manual
21
9.1 Common parameters for multiple axes
(1) Servo parameters
.oN emaNretemaraP tluafeD tnetnoC
1eziSsixA8 sexaforebmuN
2rotaremuN1 rotaremuN
3rotanimoneD1 rotanimoneD
4)%(edirrevO001edirrevO
5)G(releccA03.0rotcafnoitareleccA
6)G(xaMreleccA00.1)G(rotcafnoitareleccamumixaM
7)s/mm(leVevirD001)ces/mm(yticolevevirD
8)s/mm(xaMleVevirD0001)ces/mm(yticolevevirdmumixaM
.oN emaNretemaraP tluafeD tnetnoC
1margorPtratSotuA0 .oNrebmunmargorptratsotuA
2margorPycnegremE0 .oNrebmunmargorppotsycnegremE
3eziSmagrorP46smargorpforebmuN
4eziSksaT61sksatforebmuN
5eziSpetS0003spetsmargorpforebmuN
6ecilSemiT10.0eulavkcehcecilsemiT
.oN emaNretemaraP tluafeD tnetnoC
1)°(elgnAelcriC0.51)°(elgnaecilS
2)s/mm(tleDelcriC0 )s/mm(tnemercniyticoleV
.oN emaNretemaraP tluafeD tnetnoC
1eziStnioP0002ytitnauqatadtnioP
Reference values are indicated below. Settings at the time of shipment vary according to the actuator model.
9. List of Parameters
(2) Program parameters
(3) Point parameters
(4) Arc parameters