Manual

89
12.17 External input output command
[Function] Opens the channel specified in operand 1. Channels specified after this will be able to transmit and receive
signals. An ending character must be set by the SCHA command before executing this command.
[Example] SCHA 10 Designate 10 (=LF) as the ending character.
OPEN 1 Open channel 1.
SCHA 13 Designate 13 (=CR) as the ending character.
LET 1 2 Assign 2 to variable 1. Open channel 2, the value contained in variable 1.
OPEN *1
[Function] Closes the channel specified in operand 1. Channels specified after this will be unable to transmit and
receive signals.
[Example] CLOS 1 Close the channel.
[Example] LET 1 2 Assign 2 to variable 1.
CLOS *1 Close channel 2, the value contained in variable 1.
noisnapxE
noitidnoc
)RO·DNA(
tupnI
noitidnoc
)galF·O/I(
dnammoC
tsoP
)galF·troptuptuO(
dnammoC 1dnarepO 2dnarepO
lanoitpOlanoitpONEPO.oNlennahC
noisnapxE
noitidnoc
)RO·DNA(
tupnI
noitidnoc
)galF·O/I(
dnammoC
tsoP
)galF·troptuptuO(
dnammoC 1dnarepO 2dnarepO
lanoitpOlanoitpOSOLC.oNlennahC
12. SEL Language
● OPEN (Open Channel)
●CLOS (Close Channel)