User Manual

Page 65
Parm
Axis
Sys
10. Explanation on Each Function Screen
F1 F2 F3 F4
Parm Axis 1 [1] Home
1. Home Dir
Inc [<=]
1
Axis+ Dec Clr Wrt
Axis+
Dec
Cir
Srvo
Home
Motr
Axis Home Parameter Mode / Usable Axis • Unusable Axis Setting Mode
Name
Wrt
F1 Key: +1 to Axis No.
Return Key: +1 to column.
F2 Key: - 1 to column.
oNemaNretemaraPeulaVgnitteSlaitinItnetnoC
1riDemoH0 noitceriD
2epyTemoH0 )hctiwStimiL=L(dohteM
3ecneuqeSemoH9~0sixAdesunUsixAdesUecneuqeS
4loPwSemoH1 ytiraloPtupnItimiL
5egdEZemoH1 egdEnoitceteDesahP-Z
6leVpeerCemoH0 yticoleVpeerC
7leVkcaBemoH01yticoleVkcaB
8leVZemoH5 yticoleVhcraeSesahP-Z
9tesffOemoH0 tnuomAevoMtesffO
01noitaiveDemoH766esluP
11tnerruCemoH06timiLtnerruC
Homing reference (Home)
*2
*1
*1 When a number from 1~9 is set, you may assign homing sequence of the applicable axis. When 0 is set, you may change
the assigned axis to an unused axis (no connection). When set to an unused axis, jog movement and homing can not
execute during teaching (The current position will be displayed as XXXXX.XXX).
*2 The creep function can only be used for systems that come with Limit Switch • Option. Please always set the value as 0.
If you set the value to another number besides 0 on an actuator which does not come with a Limit Switch, correct homing
can not be executed.