User Manual

47
19) Hang the hook on the bottom of the pulley cover to the corner catch, and tighten screws on the
top.
(Use a hexagon wrench with the distance to the opposite side of 1.5mm.)
20) Execute the home-return operation on the PC (PC software) or a teaching pendant. (for the
absolute encoder, the absolute reset is required.)
Check the amount of misalignment to the original home position.
If there is a misalignment, fine-tune the home-return offset
in Parameter No. 22 for E-Con and
SCON Controllers. For P-Driver Controller, fine-tune the home-return offset
in Position Control
Data No. 17. For SSEL Controller and X-SEL Controller, use Home Preset
in Each Axis
Parameter No. 12 for adjustment.
Hang on corner catch.