User guide
*Supplement
136
Supplement
The explanation, solution, etc.
Input data error. Check the input data.
Too-small input data. Check the allowable input range.
Too-large input data. Check the allowable input range.
SEL command input error. Invalid data is input for the SEL command.
Input-condition input prohibition error. The input condition is used in the step where use of such condition is not allowed.
Input condition data error. An invalid value is input for the input condition.
Input condition out-of-range error. A value out of the input range is input for the input condition.
Input-condition no input error. No input condition is input in the step where such condition is essential.
Undefined symbol (input condition) use error. An undefined symbol is used for the input condition.
Operand 1 no input error. The operand 1 is not input in the step where the operand 1 is essential.
Operand 2 no input error. The operand 2 is not input in the step where the operand 2 is essential.
Operand 3 no input error. The operand 3 is not input in the step where the operand 3 is essential.
Operand 1 input prohibition error. The operand 1 is used in the step where use of the operand 1 is prohibited.
Operand 2 input prohibition error. The operand 2 is used in the step where use of the operand 2 is prohibited.
Operand 3 input prohibition error. The operand 3 is used in the step where use of the operand 3 is prohibited.
Operand 1 data error. An invalid data is input for the operand 1. Check the data.
Operand 2 data error. An invalid data is input for the operand 2. Check the data.
Operand 3 data error. An invalid data is input for the operand 3. Check the data.
Operand 1 input out-of-range error. A value out of the allowable input range is input for the operand 1.
Operand 2 input out-of-range error. A value out of the allowable input range is input for the operand 2.
Operand 3 input out-of-range error. A value out of the allowable input range is input for the operand 3.
Operand 1 undefined symbol use error. An undefined symbol is used for the operand 1.
Error message
Input data error
Input data too small
Input data too large
SEL Cmnd Input Error
Inputting Conditions are not allowed
Input Condition Data Error
Input Condition is out of range
No Input Condition yet
Undefined Symbol (Input Condition)
Operand not inputted (Oprnd1)
Operand not inputted (Oprnd2)
Operand not inputted (Oprnd3)
Inputting Oprnd is not allowed (Oprnd1)
Inputting Oprnd is not allowed (Oprnd2)
Inputting Oprnd is not allowed (Oprnd3)
Operand1 is invalid
Operand2 is invalid
Operand3 is invalid
Inputted Operand is out of range (Oprnd1)
Inputted Operand is out of range (Oprnd2)
Inputted Operand is out of range (Oprnd3)
Undefined symbol (Oprnd1)
@B,@
(It is an error peculiar to a Teaching Pendant. Refer to the instruction manual of X-SEL controller for the error of a controller.)
Error No.
9C0
9C1
9C2
9C3
9C4
9C5
9C6
9C7
9C8
9C9
9CA
9CB
9CC
9CD
9CE
9CF
9D0
9D1
9D2
9D3
9D4
9D5