User guide
12. Program Edit
86
#$( 0B8:
The edit data will be cleared by restoring the power and executing software reset, only if the
program edit data was transmitted to the controller.
To save the data after restoring the power and executing software reset, write the data to Flash
ROM.
From the final editing screen, return to the Flash ROM writing screen with the ESC key.
To write the data to Flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
During Flash ROM writing, “Please Wait....” blinks.
6C B @<< @D @ @@
0B8D
Flash ROM writing is complete.
Return to the edit screen with the ESC key.