Owner manual

30
5. Installation
5.2 Installing the Actuator
Tapped mounting holes are provided on the back of the actuator base. Use these tapped holes to install the
actuator.
How each model should be installed is shown in a section view.
Type Tap size Effective tap length A
S M6 17 mm 70 mm
MxMX M8 20 mm 90 mm
LxLX M8 20 mm 120 mm
Tightening torque
Applicable bolt
Bolt seating surface is steel Bolt seating surface is aluminum
M6 12.3 N-m (1.26 kgf-m) 5.4 N-m (0.55 kgf-m)
M8 30.0 N-m (3.06 kgf-m) 11.5 N-m (1.17 kgf-m)
Tap size Effective tap length
M8 25 mm
Effective tap
length
Tap size