Owner's manual
Table Of Contents
- Cover
- Please Read Before Use
- Table of Contents
- Safety Guide
- Caution in Handling
- International Standards Compliances
- Names of the Parts
- 1. Specifications Check
- 2. Installation
- 3. Connecting with the Controller
- 4. Operation
- 5. Troubleshooting
- 6. Maintenance and Inspection
- 7. Life
- 8. External Dimensions
- 9. Warranty
- Change History
2. Installation
37
٧Flat Type L15SS, L15SM
22.5 22.5
20
45
20
45
175
45
105
145
8-M5, depth 5
2-
φ
4H7, depth 6
REAMED HOLE
PITCH ±0.02
Mounting Bolt
Tapped Hole Size
Nominal Bolt Diameter Tightening Torque
Reamed Hole
M5, depth 5 M5 3.42N·m (0.35kgf·m)
I4H7, depth 6
About Tightening Screws
•
Use a hex socket head cap bolt for the attachment to the base.
• It is recommended to use high-tensile bolts with ISO-10.9 or more.
• Make sure to have the effective length of bolt engagement described below or more for the
tightening of a bolt and a female screw.
When female screw is on steel ĺ Thread length same as nominal diameter
When female screw is on aluminum ĺ Thread length 1.8 times longer them nominal diameter
Caution: • Pay special attention when selecting the bolt length. In case that an inappropriate
length of a bolt is applied, it may cause damage on the tapped holes or insufficiency
in attachment strength, which may result in a drop in the operation accuracy or an
unexpected accident.
• When attaching a transported object, pay attention not to apply a viscous liquid
such as glue or paint on the stainless steel sheet, or not to apply force on a spot,
which could make a dent mark. Doing so may cause an operation error of the slider
or damage on the sheet.