Owner's manual
Table Of Contents
- Cover
- Please Read Before Use
- Table of Contents
- Safety Guide
- Caution in Handling
- International Standards Compliances
- Names of the Parts
- 1. Specifications Check
- 2. Installation
- 3. Connecting with the Controller
- 4. Operation
- 5. Troubleshooting
- 6. Maintenance and Inspection
- 7. Life
- 8. External Dimensions
- 9. Warranty
- Change History
2. Installation
39
2.3.5 Mount of Connector Box and Others
T-slots are provided on the side faces of the actuator for installation of a connector box or other
external equipment. If you are using a wiring kit, install a connector box using these T-slots.
T-slots can also be used for other purposes, such as installing sensors or securing cables.
The T-slot dimensions are specified below.
• Use of square nuts is recommended in T-slots, but hex nuts can also be used.
• When installing an object using T-slots, select bolts of an appropriate length so that the tip of the
bolt will not contact the bottom of the T-slot.
Small Type H8SS, H8SM, H8HS, H8HM
Flat Type L15SS, L15SM
2.7
5.5
1.8
4.5 2
3.3
5.8
4.3
7.3
T-slot Dimensions
Model T-slot Nut Diameter
Small Type H8SS, H8SM, H8HS, H8HM M3
Flat Type L15SS, L15SM M4