Owner manual
Table Of Contents
- Table of Contents
- Safety Guide
- Caution in Handling
- International Standards Compliances
- Names of the Parts
- 1. Specifications Check
- 2. Installation
- 3. Connecting with the Controller
- 4. Operation
- 5. Troubleshooting
- 6. Maintenance and Inspection
- 7. Life
- 8. External Dimensions
- 9. Warranty
- Change History
2. Installation
38
2.3.5 Mount of Connector Box and Others
T-slots (M3) are provided on the side faces of the actuator for installation of a connector box or
other external equipment.
If you are using a wiring kit, install a connector box using these T-slots.
T-slots can also be used for other purposes, such as installing sensors or securing cables.
The T-slot dimensions are specified below.
• Use of square nuts is recommended in T-slots, but hex nuts can also be used.
• When installing an object using T-slots, select bolts of an appropriate length so that the tip of the
bolt will not contact the bottom of the T-slot.
1.8
5.5
2.7
5.8
3.3